| 1. |
- Ahmad, Naeem, et al.
(author)
-
A taxonomy of visual surveillance systems
- 2013
-
Reports (other academic/artistic)abstract
- The increased security risk in society and the availability of low cost sensors and processors has expedited the research in surveillance systems. Visual surveillance systems provide real time monitoring of the environment. Designing an optimized surveillance system for a given application is a challenging task. Moreover, the choice of components for a given surveillance application out of a wide spectrum of available products is not an easy job. In this report, we formulate a taxonomy to ease the design and classification of surveillance systems by combining their main features. The taxonomy is based on three main models: behavioral model, implementation model, and actuation model. The behavioral model helps to understand the behavior of a surveillance problem. The model is a set of functions such as detection, positioning, identification, tracking, and content handling. The behavioral model can be used to pinpoint the functions which are necessary for a particular situation. The implementation model structures the decisions which are necessary to implement the surveillance functions, recognized by the behavioral model. It is a set of constructs such as sensor type, node connectivity and node fixture. The actuation model is responsible for taking precautionary measures when a surveillance system detects some abnormal situation. A number of surveillance systems are investigated and analyzed on the basis of developed taxonomy. The taxonomy is general enough to handle a vast range of surveillance systems. It has organized the core features of surveillance systems at one place. It may be considered an important tool when designing surveillance systems. The designers can use this tool to design surveillance systems with reduced effort, cost, and time.
|
|
| 2. |
- Ahmad, Naeem
(author)
-
Modelling and optimization of sky surveillance visual sensor network
- 2012
-
Licentiate thesis (other academic/artistic)abstract
- A Visual Sensor Network (VSN) is a distributed system of a largenumber of camera sensor nodes. The main components of a camera sensornode are image sensor, embedded processor, wireless transceiver and energysupply. The major difference between a VSN and an ordinary sensor networkis that a VSN generates two dimensional data in the form of an image, whichcan be exploited in many useful applications. Some of the potentialapplication examples of VSNs include environment monitoring, surveillance,structural monitoring, traffic monitoring, and industrial automation.However, the VSNs also raise new challenges. They generate large amount ofdata which require higher processing powers, large bandwidth requirementsand more energy resources but the main constraint is that the VSN nodes arelimited in these resources.This research focuses on the development of a VSN model to track thelarge birds such as Golden Eagle in the sky. The model explores a number ofcamera sensors along with optics such as lens of suitable focal length whichensures a minimum required resolution of a bird, flying at the highestaltitude. The combination of a camera sensor and a lens formulate amonitoring node. The camera node model is used to optimize the placementof the nodes for full coverage of a given area above a required lower altitude.The model also presents the solution to minimize the cost (number of sensornodes) to fully cover a given area between the two required extremes, higherand lower altitudes, in terms of camera sensor, lens focal length, camera nodeplacement and actual number of nodes for sky surveillance.The area covered by a VSN can be increased by increasing the highermonitoring altitude and/or decreasing the lower monitoring altitude.However, it also increases the cost of the VSN. The desirable objective is toincrease the covered area but decrease the cost. This objective is achieved byusing optimization techniques to design a heterogeneous VSN. The core ideais to divide a given monitoring range of altitudes into a number of sub-rangesof altitudes. The sub-ranges of monitoring altitudes are covered by individualsub VSNs, the VSN1 covers the lower sub-range of altitudes, the VSN2 coversthe next higher sub-range of altitudes and so on, such that a minimum cost isused to monitor a given area.To verify the concepts, developed to design the VSN model, and theoptimization techniques to decrease the VSN cost, the measurements areperformed with actual cameras and optics. The laptop machines are used withthe camera nodes as data storage and analysis platforms. The area coverage ismeasured at the desired lower altitude limits of homogeneous as well asheterogeneous VSNs and verified for 100% coverage. Similarly, the minimumresolution is measured at the desired higher altitude limits of homogeneous aswell as heterogeneous VSNs to ensure that the models are able to track thebird at these highest altitudes.
|
|
| 3. |
|
|
| 4. |
- Alam, Mohammad Anzar
(author)
-
Online optical method for real-time surface measurement using line-of-light triangulation
- 2013
-
Doctoral thesis (other academic/artistic)abstract
- Real time paper surface-web measurement is one of the challenging research fields. The traditional laboratory method has many limitations and is unable to measure the entire tambour during the manufacturing process. It has been necessary to develop an online technique that could measure the surface topography in real time. An optical technique was developed, based on laser triangulation, and is applied to develop a new prototype device, which characterizes high speed paper-web surfaces over a wide scale of spatial wavelengths spectrum and computes the surface roughness in real time. The used multi channel pulsed laser diode, source of illumination onto the paper-web, is of benefit due to its low coherence length and is capable to deliver a powerful burst of light beam over a 1 µs duration, which delivers energy of 100 µJ per pulse. The short exposure time avoids blurriness in the acquired images which could possible due to the high speed and vibrations on the paper-web.The laser beam is shaped into a narrow line-of-light using cylindrical lenses and is projected onto a paper-web surface, which covers a physical length of about 210 mm. The created line-of-light cross section full width at half maximum, FWHM Gaussian distribution, is 2-3 pixels on the image. The line-of-light is projected onto the paper-web perpendicular to the plane of the surface. The low angled, low specular, reduced coherence length, scattered reflected laser line is captured by the 3 CCD sensors, which are synchronized with the laser source. The low specular light ensures to avoid saturation of the imaging sensors if the surface is very smooth, and obliquely captures the z-directional fine feature of the surface.The scattered phenomenon of the reflected light is responsible for the surface irregularity measurements. The basic image processing algorithm is applied in order to remove noise and cropped the images widthwise so that only pixels above a preset threshold gray level can be processed, which enables efficient real time measurement. The image is transformed into a 1D array using the center of gravity, COG. The accuracy and precision of the COG depends on the line-of-light FWHM, which, in turn, is responsible for the accuracy, noise and the resolution of the developed technique. The image subpixel resolution achieved is 0.01 times a pixel and uuncertainty in the raw data is 0.43 µm while it is 0.05 µm in the rms roughness.The signal processing steps combining the B-Spline filter and the filter in the spatial frequency domain were employed in order to separate roughness, waviness, and form and position error in the raw profile. The prototype is designed to measure online surface roughness and to characterize surface in a spatial wavelength spectrum from 0.09 to 30 mm, which is extendable to any required spatial range in order to cover a wide scale surface feature such as micro roughness, macro roughness and waviness. It is proven that exploitation of a simple laser triangulation technique could lead to an improvement in the overall quality and efficiency in the paper and paperboard industries and it can also be of potential interest for the other surface characterization problems.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Alqaysi, Hiba
(author)
-
Cost Optimization of Volumetric Surveillance for Sky Monitoring : Towards Flying Object Detection and Positioning
- 2022
-
Doctoral thesis (other academic/artistic)abstract
- Unlike surface surveillance, volumetric monitoring deals with three-dimensional target space and moving objects within it. In sky monitoring, objects fly within outdoor and often remote volumes, such as wind farms and airport runways. Therefore, multiple cameras should be implemented to monitor these volumes and analyze flying activities.Due to that, challenges in designing and deploying volumetric surveillance systems for these applications arise. These include configuring the multi-camera node placement, coverage, cost, and the system's ability to detect and position flying objects.The research in this dissertation focuses on three aspects to optimize volumetric surveillance systems in sky monitoring applications. First, the node placement and coverage should be considered in accordance with the monitoring constraints. Also, the node architecture should be configured to minimize the design cost and maximize the coverage. Last, the system should detect small flying objects with good accuracy.Placing the multi-camera nodes in a hexagonal pattern while allowing overlap between adjacent nodes optimizes the placement. The inclusion of monitoring constraints like monitoring altitude and detection pixel resolution influences the node design. Furthermore, presented results show that modeling the multi-camera nodes as a cylinder rather than a hemisphere minimizes the cost of each node. The design exploration in this thesis provides a method to minimize the node cost based on defined design constraints. It also maximizes the coverage in terms of the number of square meters per dollar. Surveillance systems for sky monitoring should be able to detect and position flying objects. Therefore, two new annotated datasets were introduced that can be used for developing in-flight birds detection methods. The datasets were collected by Mid Sweden University at two locations in Denmark. A YOLOv4-based model for birds detection in 4k grayscale videos captured in wind farms is developed. The model overcomes the problem of detecting small objects in dynamic background, and it improves detection accuracy through tiling and temporal information incorporation, compared to the standard YOLOv4 and background subtraction.
|
|
| 8. |
- Cheng, Peng
(author)
-
Applications of embedded sensors in loader crane positioning and rotor RPM measurement
- 2011
-
Doctoral thesis (other academic/artistic)abstract
- In this thesis, two novel applications involving embedded sensors arestudied, one dealing with loader crane positioning and the other involving rotorRevolutions Per Minute (RPM) measurement. The thesis presents a generalintroduction to the embedded sensor, its architecture and its use in mechanicalindustry, and provides the reader with an overview of conventional sensortechnologies within the fields of angle sensors and angular speed sensors, coveringtheir working principles, features, advantages and disadvantages and typicalapplications. The particular problems associated with the use of conventionalsensors in both loader crane positioning and rotor RPM measurement aredescribed and these problems provided the motivation for the designs of theembedded sensor systems developed in this thesis.In the case of the loader crane positioning, the origins of the project and thespecial requirements of the application are described in detail. In addition, apreliminary study is conducted in relation to the idea of a contactless joint angularsensor using MEMS inertial sensors in which four different methods, namely, theCommon-Mode-Rejection with Gyro Integration (CMRGI), Common-Mode-Rejection (CMR), Common-Mode-Rejection with Gyro Differentiation (CMRGD)and Distributed Common-Mode-Rejection (DCMR), are conceived, modeled andtested on a custom-designed prototype experimental setup. The results gatheredfrom these four methods are compared and analyzed in order to identify thedifferences in their performances. The methods, which proved to be suitable, arethen further tested using the prototype sensor setup on a loader crane and theperformance results are analyzed in order to make a decision in relation to the twomost suitable methods for the application of the loader crane positioning. Theresults suggested that the two most suitable were the CMRGD and the DCMR. Thepractical design issues relating to this sensor system are highlighted andsuggestions are made in the study. Additionally, possible future work for thisproject is also covered.In the first case for the rotor RPM measurement, the thesis presents themodeling and simulation of the stator-free RPM sensor idea using the Monte Carlomethod, which demonstrated the special features and performance of this sensor.The design aspects of the prototype sensor are described in detail and theprototype is tested on an experimental setup. The conclusions for the stator-freeRPM sensor are then made from the analysis of the experimental results and futurework in relation to this sensor is also proposed.In the second case of the rotor RPM measurement, the thesis presentsanother idea involving the laser mouse RPM sensor and the main focus of thestudy is on the performance characterization of the laser mouse sensor and theverification of the RPM sensor idea. Experiments are conducted using the test setup and results are gathered and analyzed and conclusions are drawn.Possibilities in relation to future work for this laser mouse RPM sensor are alsoprovided.The summary and the conclusion form the final chapter of the thesis andseveral important aspects of the designs relating to both the loader cranepositioning project and the rotor RPM measurement project are discussed.
|
|
| 9. |
|
|
| 10. |
- Forsström, Stefan, 1984-, et al.
(author)
-
Specialanpassade kurser för yrkesverksamma ingenjörer : Erfarenheter och upplevelser
- 2023
-
In: Bidrag från den 9:e utvecklingskonferensen för Sveriges ingenjörsutbildningar. - : Mälardalens universitet. - 9789174856200 ; , s. 348-353
-
Conference paper (other academic/artistic)abstract
- I dagens samhälle blir det allt viktigare att fortbilda sig under hela sitt yrkesverksamma liv. För att möta efterfrågan på det livslånga lärandet har Mittuniversitetet utvecklat och genomfört ett antal kurser som riktar sig mot yrkesverksamma ingenjörer. Detta arbete presenterar våra erfarenheter av att ge dessa kurser, med en tyngdpunkt på studenternas upplevelser. Syftet med detta är att bygga upp en vetenskaplig bas för vad vi gör som är bra, men även vad som kan förbättras och förändras. Målsättningen är att göra dessa specialanpassade kurser riktade mot yrkesverksamma ingenjörer så givande och flexibla som möjligt. Våra initiala resultat visar bland annat att studenternas negativa upplevelser ofta var kopplade till antagningsförfarandet och det praktiska genomförandet av kurserna. Man hade svårigheter med att hitta hur man skulle registrera sig på kursen och att tidsramen för registrering kunde vara ett problem. Läroplattformen uppfattades som svår att överblicka och det förekom även viss otydlighet gällande var undervisningen skulle äga rum. Den positiva responsen i utvärderingarna gällde främst det faktiska kursinnehållet, då man ansåg att uppgifter och kursmaterial var givande. Vidare uppskattades kursupplägget, att man kunde kombinera studierna med arbete. Framledes kommer vi att fortsätta med dessa utvärderingar i takt med att kurserna ges, och därefter anpassa vårt mottagande och kommunikationen med studenterna. Även kursupplägget ses över kontinuerligt via den återkoppling vi mottar.
|
|
